post tension pre-stres pc strand tensioning mono stressing j
-
Hydraulic Bottle Post Pre-stres Pc Strand Anchor Anchorage
Hydraulic Bottle Post Pre-stres Pc Strand Anchor Anchorage Steel Wire Tension Mono Stressing Jack Jacks For Trucks , Find Complete Details about Hydraulic Bottle Post Pre-stres Pc Strand Anchor Anchorage Steel Wire Tension Mono Stressing Jack Jacks For Trucks,Jacks For Trucks,Stressing Mono Strand Jack,Mono Strand Post Tension Pre-stres Pc Strand Anchor Anchorage Steel Wire Tension Mono ...User rating: 4.9/5
-
Qyc Post Tension Prestressing Mono Hydraulic Jack - Buy
QYC Post Tension Prestressing Mono Hydraulic Jack Descriptions of hydraulic jack . 1. Used for single strand tensioning or stressing multi strands one by one. 2. Applied to high strength steel stranded wires of various sizes. 3. Suitable for stressing mono strands, the specification is Φ 15.24 and Φ 12.7.
-
lqm stressing pre tension jacking system-☆Hydraulic Jack
Stressing Equipment - Post Tensioning System. Stressing Equipment. ... Mono Jack is the tensioning jack for single strand stressing, with strand size ranging from 9.53mm to 15.70mm. Stressing Jack is the multistrand jack with capacity of 100 to 1,500 tonnes. And Lifting Jack is for heavy lifting purposes.
-
China Post Tension Pre-Stres PC Strand Tensioning Mono
China Post Tension Pre-Stres PC Strand Tensioning Mono Stressing Jack, Find details about China Jack, Hydraulic Jack from Post Tension Pre-Stres PC Strand Tensioning Mono Stressing Jack - Tianjin Sunwin Prestressed Technique Co., Ltd.
-
Stressing Jack - Post Tensioning System
TMG Stressing Jack (also known as Multi Strand Jack) is small, compact and highly efficient.Unlike the Mono Jack where a single PC strand is stressed at any one time, Stressing Jack is meant to stress all the strands in the tendon at the same time. The purpose of stressing all strands at the same time is for speed and accuracy.
-
Stressing Jack | TMG - Post Tensioning System
Jul 25, 2015· Flat Anchors of 3 - 5 x 12.70mm PC strand were used for the slab post tensioning, and multistrand Anchors of 19 x 12.70mm PC strand were used for the beam post tensioning. Both Mono Jack and 300 ton Stressing Jack were used in this project.
-
multi stressing jack for pc strand-☆Hydraulic Jack
QYC Mono-strand Bottle Jack - china-anchorage.com. QYC mono-strand bottle jack is used for stressing mono-strand, including high tension wire with dia. from 5mm to 10mm, strand with dia. less than 15.24mm, mono-strand stressing for group anchor, trouble clearing, quit of anchor and additional stressing.
-
Post Tension & Concrete Stressing Jacks | Post Tensioning
Post Tension Stressing Jacks from SGS. Our range of SPX Power Team stressing jacks are super-efficient and the internal hydraulic fluid control ensure safety during the tensioning and retraction movements. Concrete stressing jacks from SGS are the number one …
-
Monostrand Post-Tensioning System - DSI USA
An open throat, twin ram jack for stressing 0.5 (12.7 mm) or 0.6 (15.2 mm) single strand is suitable for stressing at tendon ends or at intermediate tendon anchors. For tendon elongation greater than the stroke of the jack, the wedges are temporarily seated after partial stressing and the jack is recycled.
-
Multistrand Post-Tensioning System - DSI USA
Multistrand Post-Tensioning System. ... They employ inner tube bundles with automatic gripping devices that guide the strand safely through the inside of the jack. This feature makes it possible to control the stressing operation with the highest degree of reliability.
Our Factory
Founded in 2012, Gaode Equipment Co., Ltd. (short:“Gaodetec”) owns the most advanced imported production equipment and complete production technology...
Read MoreOur Meters
Factory Gallery
Contact Us
- Gaode Equipment Co., Ltd.
- [email protected]
- www.hydraulicjackforsale.com