post tension bridge construction mono pc strand stressing ja
-
Stressing Jack | TMG - Post Tensioning System
Jul 25, 2015· Flat Anchors of 3 - 5 x 12.70mm PC strand were used for the slab post tensioning, and multistrand Anchors of 19 x 12.70mm PC strand were used for the beam post tensioning. Both Mono Jack and 300 ton Stressing Jack were used in this project.
-
Stressing Equipment - Post Tensioning System
Stressing Equipments is an essential part of post tensioning / prestressed concrete work. TMG has a range of stressing equipments that includes Mono Jack, Stressing Jack, Bond Head Machine, Compression Fitting Machine etc, and accessories, to economically and efficiently stress its tendons.Our equipments are designed to inter-match different pumps and jacks to achieve maximum efficiency.
-
Monostrand Post-Tensioning System - DSI USA
An open throat, twin ram jack for stressing 0.5 (12.7 mm) or 0.6 (15.2 mm) single strand is suitable for stressing at tendon ends or at intermediate tendon anchors. For tendon elongation greater than the stroke of the jack, the wedges are temporarily seated after partial stressing and the jack is recycled.
-
Post Tensioning Jacks - PJM Industrial
Mono Strand Post Tensioning Jacks. PJM Industrial offer 10T, 25T and 30T Mono Strand Post-tension Jacks. 10 Tonne Mono Strand Jack. The 10 Tonne Mono Strand Post-Tensioning Jack is ideal for initialing in the post tensioning industry and Roof Bolting in the Mining Industry.
-
BBR | What is post-tensioning?
But also off-site prefabrication of post-tensioning tendons can offer great benefits for certain construction projects. Concrete placement follows next. When the concrete has attained its minimum strength, the strands are anchored in a common anchorage device and stressed with a large, multi-strand jack or mono-strand stressing tool.
-
multi stressing jack for pc strand-☆Hydraulic Jack
QYC Mono-strand Bottle Jack - china-anchorage.com. QYC mono-strand bottle jack is used for stressing mono-strand, including high tension wire with dia. from 5mm to 10mm, strand with dia. less than 15.24mm, mono-strand stressing for group anchor, trouble clearing, quit of anchor and additional stressing.
Our Factory
Founded in 2012, Gaode Equipment Co., Ltd. (short:“Gaodetec”) owns the most advanced imported production equipment and complete production technology...
Read MoreOur Meters
Factory Gallery
Contact Us
- Gaode Equipment Co., Ltd.
- [email protected]
- www.hydraulicjackforsale.com